Now that the designing, scale and proportions were nailed it was time to get cracking in metal.
I received the discs of copper and brass from Warren who had spun the edges over as mentioned in part 1. I now need to carefully mark and saw each one, as four of the five pieces were made up of two adjoining semi circles.
Because these discs were so big (the largest ones just under 500mm) I had to use the “deep throat” saw - yes that is its genuine name - to be able to saw deep enough. This was a long hard task, with 8 to saw through. Have I mentioned this was during our summer of never ending heatwaves?!
Next up was the texturing. Every single mark of the texture you see in these pieces was created with my own fair hands. Hitting metal on metal with metal, on such big surfaces, repeatedly and in a heatwave is very hard going. My arms, neck, shoulders and back were killing me for a number of days. It was intense. But eventually I got there and was pleased with the progress of the pieces.
I had never used this on such large areas before but yes it works just as well as it does on the smaller work I have used it on. Hurrah.
Now for the tricky part. When you texture metal you are effectively stretching/moving the surface in some areas but not other areas. This can create the surface to warp. To rectify this you need to anneal the metal which means heating it up with a torch to allow the molecules to relax which in turn means the metal becomes more malleable again, then mallet the metal over various forms to help flatten it again. More heat and more hammering during the heatwave. I was not a fan of the hot weather accompanying this commission I can tell you. And when you flatten one part, another part pops out of shape. But slowly I got there.
Once all the pieces had been textured and flattened they then had to be cut to exact size. This meant a lot of filling, and a lot of offering the pieces up to each other to see exactly where needed to be filed. Little and often until they were all just right.
Next they were off to be gold and silver plated. It was goodbye from me for a while and I could enjoy a rest from all the hammering. What I planned to do while they were off being plated was make a start on the MDF supports. Or should I say get my dad to make a start with my help (he calls me the foreman which I think is his way of saying I’m bossy…) but the delivery company cocked up and we didn’t receive them in time.
Steve plated the pieces in record time, big thank you to Steve, but Royal Mail decided to lose them on the return trip. Despite being sent on an insured and guaranteed delivery by 1pm next day service, no one could tell me where they were. I spent a lot of time on hold to various RM customer services who all told me the same - if it hadn’t arrived in two weeks let them know and they would reimburse the postage (nearly £40). I don’t mind admitting I was not in a good frame of mind for those days when the pieces were missing. Firstly I didn’t have time to remake everything for the deadline, secondly I didn’t have the money to pay for everything again. Thirdly how can Royal Mail offer an insured service, were you send pieces worth thousands, they lose them and all they do is shrug their shoulders and say contact us in a fortnight and we will refund the postage only?? Yes I had a mini breakdown while trying really hard not to have a mini breakdown. I was also very concerned that I would have to reimburse the deposit my client had paid me, which of course I couldn’t do because I had already spent it on all of the materials and now also owed the spinner and plater for their services, which I needed the balance from my clients to pay. It was a very stressful time!
Anyway, finally the pieces arrived. The box was quite damaged but thankfully everything inside was ok. I was still not ok.
Now onto the MDF supports. Dad got about cutting them, measuring them against the metal to ensure they were spot on, gluing them and screwing them so they were nice and strong. I then stuck baise onto the back, which is that soft black fabric you’ll find under antiques. Every time we touched anything we were wearing white cotton gloves as we couldn’t risk getting any marks on these pieces. I was now sick of putting white gloves on and off and my dad began to realise just how fussy silver and gold is, and the absolute ballache doing anything with large scale precious metal is.
Once the supports were finished and covered it was time to bond them to their metal partners. Another lengthy job, but teamwork makes the dreamwork. Now to let them set for 24 hours.
I had a bit of a panic that I hadn’t glued it right, it isn’t something I’m used to working with. I had a quick check and all was ok. Actually that is a lie, 4 of the 5 were ok, and one needed a bit of help so I redid it and now 5 were ok. You live and you learn but it was resolved before it was too late.
My studio absolutely stank of glue the next day. And the day after, when I packed the pieces up ready to drive from Norfolk to Darlington. After a long drive they were handed over, unpacked and checked, and I could finally relax. Phew.
I’m really proud of what I had achieved. Aside from the almost impossible timescale, and delivery companies doing their best to thwart my progress, I pulled it out of the bag. I had amazing help from Warren the spinner, Steve the Gilder, my dad who was my right hand man for the duration, and my mum who picked up the slack on things when I was knee deep in all things Titans Toast. It was a team effort.
When I finally receive the professional photographs from the team at Atlas I will be able to show you their new home and how good they look in their very luxurious surroundings. If you too would like to commission some champagne displays - or something a little more day to day - please get in touch…
An article I found about Atlas where my pieces now live